Welcome, Guest. Please login or register.

Login with username, password and session length




August 21, 2025, 02:46:30 AM
Funfani.com - Spreading Fun All Over!IMAGE CORNERWallpapers/Cool ImagesMiscellaneousHow Lays Are Manufactured in Pepsico Factories
« previous next »
Pages: [1] 2 3 4 5 6   Go Down
Print
Author Topic: How Lays Are Manufactured in Pepsico Factories  (Read 9351 times)
0 Members and 1 Guest are viewing this topic.
Paul Voebel
FF Trendsetter
*****

Karma: 0
Offline Offline

Posts: 9476
« on: December 24, 2010, 12:07:21 AM »


This is a plant of PepsiCo, where chips Lay’s are produced. It has been opened recently in the city Azov of Rostov region. Let’s go over the whole sequence of production.
Report to moderator   Logged
Paul Voebel
FF Trendsetter
*****

Karma: 0
Offline Offline

Posts: 9476
« Reply #1 on: December 24, 2010, 12:08:16 AM »


Peeling, assortment and cutting potato
Report to moderator   Logged
Paul Voebel
FF Trendsetter
*****

Karma: 0
Offline Offline

Posts: 9476
« Reply #2 on: December 24, 2010, 12:09:45 AM »
Before potatoes go to the cutting machine workers check if there are any defects on the vegetables or not. If there are some they are cut out



There are special sorts of potato, which are acceptable for chips-making, such sorts have higher
Report to moderator   Logged
Paul Voebel
FF Trendsetter
*****

Karma: 0
Offline Offline

Posts: 9476
« Reply #3 on: December 24, 2010, 12:10:56 AM »
content of starch.



All the workers regularly have a medical and a certificate that they are healthy, and they all wash
Report to moderator   Logged
Paul Voebel
FF Trendsetter
*****

Karma: 0
Offline Offline

Posts: 9476
« Reply #4 on: December 24, 2010, 12:12:13 AM »
their hands before working.




Peeling does in the abrasive barrels with periodical moving. First needed quantity of potato is
Report to moderator   Logged
Paul Voebel
FF Trendsetter
*****

Karma: 0
Offline Offline

Posts: 9476
« Reply #5 on: December 24, 2010, 12:13:52 AM »
weighed in a special bunker to go to the barrel.



Cutting, each piece shouldn’t be thicker than 2mm.

Go to The NEXT Page for More Pictures >>>
Report to moderator   Logged
Pages: [1] 2 3 4 5 6   Go Up
Print
« previous next »

Jump to: